Detection combinations never before offered in a portable gas monitor are now available featuring the industry’s widest selection of high quality, long life and field proven sensors. The EAGLE 2 now includes PID (Photo Ionization Detector) capability. Conversion factors for a variety of common gases are programmed into the EAGLE 2 for both the PID sensor and LEL/PPM catalytic sensor.
Unique EAGLE 2 features include PPM or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2, methane or hydrocarbons in LEL and % volume ranges; PID sensor for detecting high and low ppm levels (0-50 & 0-4,000) of VOC gases; methane elimination feature for environmental applications; and a list of super toxic gases and measurable ranges.
The EAGLE 2 has a strong internal pump with a low flow auto pump shut off and alarm, which can draw samples from up to 3,80 metres. This allows for quick response and recovery from distant sampling locations.
|
|
A variety of accessories are also available to help satisfy almost any application such as long sample hoses, special float probes for tank testing, and dilution fittings, just to name a few. Datalogging is a standard feature. With its ergonomic design and large glove friendly buttons, the EAGLE 2 offers easy access to controls such as autocalibration, alarm silence, demand zero, peak hold, methane elimination, and a wide variety of other features.
Features
- Monitor up to 6 different autoranging gases
- PID (Photo Ionization Detector), IR Sensor and TC (Thermal Conductivity)
- Plug and play, smart toxic sensors
- Powerful long-life pump up to 380 cm range
- IrDA (datalogging standard)
- Intrinsically safe design
|
|
|
Each channel has two alarm levels plus TWA and STEL alarms for toxic channels. The two alarm levels are user adjustable and can be latching or self resetting.
Rugged, reliable, easy to operate and maintain, the EAGLE 2 fits for any portable gas monitoring situation.
|
Special Features
|
- Low flow alarm shuts pump off to avoid damage to instrument
|
- Methane elimination feature for environmental applications
|
- Hydrophobic filter disc in probe
|
- Security password protected
|
- Internal hydrophobic filter
|
|
- Single gas calibration capability
|
- Intrinsically safe design
|
- Plug and play toxic sensors
|
- Hundreds of configurations available
|
|
Gases and Detectable Ranges
|
|
Standard Confined Space Gases
|
|
Hydrocarbons (CH4...)
|
0 - 100% LEL
0 - 50,000 ppm
|
|
Oxygen (O2)
|
0 - 40% Vol.
|
|
Carbon Monoxide (CO)
|
0 - 500 ppm
|
|
Hydrogen Sulfide (H2S)
|
0 - 100 ppm
|
|
Toxics
|
|
Ammonia (NH3)
|
0 - 75 ppm
|
|
Arsine (AsH3)
|
0 - 1.5 ppm
|
|
Chlorine (Cl2)
|
0 - 3 ppm
|
|
Hydrogen Cyanide (HCN)
|
0 - 10 ppm
|
|
Phosphine (PH3)
|
0 - 1 ppm
|
|
Sulfur Dioxide (SO2)
|
0 - 6 ppm
|
|
IR Sensors
|
|
Carbon Dioxide (CO2)
|
0 - 10,000 ppm
0 - 5% Vol.
0 - 60% Vol.
|
|
Methane (CH4)
|
0 - 100% LEL
0 - 100% Vol.
|
|
Hydrocarbons
|
0 - 100% LEL
0 - 30% Vol.
|
|
PID Sensors
|
|
VOC
|
0 - 4,000 ppm
0 - 50 ppm
|
|
TC Sensors
|
|
Methane (CH4)
|
0 - 100% Vol.
|
|
Hydrogen (H2)
|
0 - 10% Vol.
0 - 100% Vol.
|
The EAGLE 2 can be configured with up to 6 gas sensors from the above list..
|
Model
|
EAGLE 2
|
Detection Principle
|
Catalytic combustion, electrochemical cell, galvanic cell, infrared, photo ionization detector, and thermal conductivity.
|
|
Sampling Method
|
Powerful, long-life pump (over 6,000 hours) can draw samples over 380 cm.
Flow rate approximately 2.0 SCFH
|
|
Auflösung
|
Maximum variance +/- 5% of full scale.
|
Response Time
|
30 Seconds to 90% (for most gases) using standard 150cm hose.
|
|
Alarms
|
2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and silenceable.
|
|
Enclosure
|
Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-polyester blend. Can operate within 2.0” of water without leakage.
Ergonomically balanced with rugged top mounted handle.
Water & dust resistant equivalent to IP65.
|
Safety Rating
|
EIntrinsically Safe, Class I, Division 1, Groups A, B, C and D. CE approved
|
|
Display
|
3 display modes: display all gases, large font-autoscroll, or large font manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand with adjustable time.
|
|
Controls
|
4 External glove friendly buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and others
|
Language
|
Multilingual readout (English, French, German, Italian, or Spanish.
|
|
Power Source
|
4 Alkaline or Ni-MH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines).
|
|
Continuous Operation
|
16 hours using alkaline batteries or 20 hours using Ni-MH (both at 20°C)
|
Operating Temp. & Humidity
|
-20°C to 50°C, 0 to 95% RH, non-condensing.
|
|
Dimensions & Weight
|
Ca. 241 x 133 x 149 mm, 1,7 kg (standard 4 gas with batteries)
|
|
Accessories
|
Standard: manual with video training, alkaline batteries, shoulder strap, hydrophobic probe, 5 foot hose, internal hydrophobic filter
Optional: dilution fitting (50/50), Ni-MH batteries, battery charger(115 VAC, 220 VAC or 12 VDC, charge time 4 hours), continuous operation adapter (115 VAC, 220 VAC or 12 VDC), extension hoses |
All Specifications subject to change without notice.
|
|
